Feet to Meters Converter

Feet and meters are widely used units of linear length. The foot belongs to the imperial and United States customary systems, while the meter is the base unit of length in the International System of Units. One international foot is defined as exactly 0.3048 meter. Therefore, converting feet to meters is a direct multiplication: multiply the number of feet by 0.3048. The exact relationship was standardized internationally in 1959, replacing small regional differences in earlier foot definitions for most everyday and technical uses. Because 0.3048 is an exact factor rather than a measured approximation, any rounding in a result comes from the displayed decimal precision or the original measurement, not from uncertainty in the conversion itself. The calculator retains the factor internally and displays enough digits for practical projects. Feet remain common for human height, room dimensions, property descriptions, aviation altitude, sports facilities, and construction in countries that use customary measurements. Meters dominate scientific work and are used for everyday distance in most of the world. Converting between them is essential when plans, equipment, research, or records cross measurement systems. For example, a 94-foot basketball court is 28.6512 meters long, and a 12.5-foot room dimension is 3.81 meters. Decimal feet should not be read as feet-and-inches notation. A value of 5.75 feet means five and three-quarter feet, which is five feet nine inches because 0.75 foot equals nine inches. It converts to 1.7526 meters. By contrast, a written height of five feet seven inches first needs to become decimal feet or total inches before using this single-field converter. Divide the inch portion by twelve and add it to the feet portion. The result describes linear distance only. Converting square feet to square meters requires squaring the length factor, giving approximately 0.09290304 square meter per square foot. Converting cubic feet to cubic meters requires cubing it, giving approximately 0.028316846592 cubic meter per cubic foot. Do not use the linear 0.3048 factor directly for area or volume. For construction, engineering, and scientific work, match the reported precision to the source measurement. Entering an approximate length does not become more accurate simply because the calculator shows several digits. For international projects, sports dimensions, room planning, height records, or quick everyday conversions, this tool provides an immediate and transparent metric equivalent.